Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

Q is empty.


QTRS
  ↳ Non-Overlap Check

Q restricted rewrite system:
The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

Q is empty.

The TRS is non-overlapping. Hence, we can switch to innermost.

↳ QTRS
  ↳ Non-Overlap Check
QTRS
      ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

The set Q consists of the following terms:

from1(x0)
head1(cons2(x0, x1))
2nd1(cons2(x0, x1))
take2(0, x0)
take2(s1(x0), cons2(x1, x2))
sel2(0, cons2(x0, x1))
sel2(s1(x0), cons2(x1, x2))


Using Dependency Pairs [1,13] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

SEL2(s1(N), cons2(X, XS)) -> SEL2(N, XS)
TAKE2(s1(N), cons2(X, XS)) -> TAKE2(N, XS)
2ND1(cons2(X, XS)) -> HEAD1(XS)
FROM1(X) -> FROM1(s1(X))

The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

The set Q consists of the following terms:

from1(x0)
head1(cons2(x0, x1))
2nd1(cons2(x0, x1))
take2(0, x0)
take2(s1(x0), cons2(x1, x2))
sel2(0, cons2(x0, x1))
sel2(s1(x0), cons2(x1, x2))

We have to consider all minimal (P,Q,R)-chains.

↳ QTRS
  ↳ Non-Overlap Check
    ↳ QTRS
      ↳ DependencyPairsProof
QDP
          ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

SEL2(s1(N), cons2(X, XS)) -> SEL2(N, XS)
TAKE2(s1(N), cons2(X, XS)) -> TAKE2(N, XS)
2ND1(cons2(X, XS)) -> HEAD1(XS)
FROM1(X) -> FROM1(s1(X))

The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

The set Q consists of the following terms:

from1(x0)
head1(cons2(x0, x1))
2nd1(cons2(x0, x1))
take2(0, x0)
take2(s1(x0), cons2(x1, x2))
sel2(0, cons2(x0, x1))
sel2(s1(x0), cons2(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [13,14,18] contains 3 SCCs with 1 less node.

↳ QTRS
  ↳ Non-Overlap Check
    ↳ QTRS
      ↳ DependencyPairsProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
QDP
                ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

SEL2(s1(N), cons2(X, XS)) -> SEL2(N, XS)

The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

The set Q consists of the following terms:

from1(x0)
head1(cons2(x0, x1))
2nd1(cons2(x0, x1))
take2(0, x0)
take2(s1(x0), cons2(x1, x2))
sel2(0, cons2(x0, x1))
sel2(s1(x0), cons2(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be strictly oriented and are deleted.


SEL2(s1(N), cons2(X, XS)) -> SEL2(N, XS)
The remaining pairs can at least by weakly be oriented.
none
Used ordering: Combined order from the following AFS and order.
SEL2(x1, x2)  =  x1
s1(x1)  =  s1(x1)
cons2(x1, x2)  =  x1

Lexicographic Path Order [19].
Precedence:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ Non-Overlap Check
    ↳ QTRS
      ↳ DependencyPairsProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ PisEmptyProof
              ↳ QDP
              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

The set Q consists of the following terms:

from1(x0)
head1(cons2(x0, x1))
2nd1(cons2(x0, x1))
take2(0, x0)
take2(s1(x0), cons2(x1, x2))
sel2(0, cons2(x0, x1))
sel2(s1(x0), cons2(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ Non-Overlap Check
    ↳ QTRS
      ↳ DependencyPairsProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
QDP
                ↳ QDPOrderProof
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

TAKE2(s1(N), cons2(X, XS)) -> TAKE2(N, XS)

The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

The set Q consists of the following terms:

from1(x0)
head1(cons2(x0, x1))
2nd1(cons2(x0, x1))
take2(0, x0)
take2(s1(x0), cons2(x1, x2))
sel2(0, cons2(x0, x1))
sel2(s1(x0), cons2(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be strictly oriented and are deleted.


TAKE2(s1(N), cons2(X, XS)) -> TAKE2(N, XS)
The remaining pairs can at least by weakly be oriented.
none
Used ordering: Combined order from the following AFS and order.
TAKE2(x1, x2)  =  x1
s1(x1)  =  s1(x1)
cons2(x1, x2)  =  x1

Lexicographic Path Order [19].
Precedence:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ Non-Overlap Check
    ↳ QTRS
      ↳ DependencyPairsProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ PisEmptyProof
              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

The set Q consists of the following terms:

from1(x0)
head1(cons2(x0, x1))
2nd1(cons2(x0, x1))
take2(0, x0)
take2(s1(x0), cons2(x1, x2))
sel2(0, cons2(x0, x1))
sel2(s1(x0), cons2(x1, x2))

We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ Non-Overlap Check
    ↳ QTRS
      ↳ DependencyPairsProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
QDP

Q DP problem:
The TRS P consists of the following rules:

FROM1(X) -> FROM1(s1(X))

The TRS R consists of the following rules:

from1(X) -> cons2(X, from1(s1(X)))
head1(cons2(X, XS)) -> X
2nd1(cons2(X, XS)) -> head1(XS)
take2(0, XS) -> nil
take2(s1(N), cons2(X, XS)) -> cons2(X, take2(N, XS))
sel2(0, cons2(X, XS)) -> X
sel2(s1(N), cons2(X, XS)) -> sel2(N, XS)

The set Q consists of the following terms:

from1(x0)
head1(cons2(x0, x1))
2nd1(cons2(x0, x1))
take2(0, x0)
take2(s1(x0), cons2(x1, x2))
sel2(0, cons2(x0, x1))
sel2(s1(x0), cons2(x1, x2))

We have to consider all minimal (P,Q,R)-chains.